My 2nd daughter was born a few days ago. I had set up the baby diaper trash can, but I didn’t have the holder for the filters. I designed this print as a “print-in-place” model. Use double-sided foam tape or a 3M command strip to secure.
I used 3M Command Picture Hanging Strips (Medium) found here. (#ad) https://is.gd/jollvV
I saw on r/eufy there was a request for a windows mount option similar to the wzye camera. I previously created an outdoor enclosure for the Eufy 2K Camera here: https://www.thingiverse.com/thing:4638649
So creating this didn’t take too long. It uses the 3M Command Picture Hanging Strips (Medium) found here. (#ad) https://is.gd/jollvV
This mount allows the camera to be pulled flush against the window.
I recently purchased the AmpliFi Alien WiFi 6 WiFi System, this includes the standalone mesh point. I spent the weekend running ethernet in the attic to have an access point in the closet in the back of the house via an ethernet backbone.
This mount will fit both the main router wifi access point and the mesh point.
I built an outdoor printer enclosure and wanted to use the extra space I had in the rear to storage my extra spools of filament. You can storage filament like I did or use it as a filament spool hanger.
I loved LEGO as a kid and so does my daughter. I created these simple LEGO boxes to hold various items, I mostly use them to hold random SD/Micro SD cards next to my PC. I also created a Nintendo Switch version to hold video games.
There are 2 versions, stackable and non-stackable boxes. All should be interchangeable, but I matched each set with the top & bottom as they were created.
All parts are print-orientation ready, I would print the tops with a brim so they don’t come off the build plates. Remember to clean the brim off cleaning to ensure both top and bottom fit together nicely.
Note: Tested with PRUSA MK3S/ PRUSA MINI with 0.4 & 0.6 Nozzles & 0.2, 0.25, 0.3 layer heights to ensure correct tolerances.
I created a battery adapter to attach an AUKEY 10000 power bank (PB-N83) to the “HTC Vive Deluxe Audio Strap” or “Quest 2 Elite Strap”. This battery allows pass-through charging so I wouldn’t need to unplug the cable on the headset and only need one cable to charge.
The battery adapter attaches to the bottom strap of the ” HTC Vive Deluxe Audio Strap” or with zip ties to the “Quest 2 Elite Strap”. Additionally, I included two loops to attach a velcro strap to hold the battery in the holder more securely.
Note: For the Quest 2 Elite Strap, I added some Neoprene sponge foam I had on-hand to prevent scratching.
The model doesn’t require any supports and is print-orientation-ready.
Quest2_Elite_Strap_AUKEYBattery_Holder.stl – For Quest 2 Elite Strap Users Vive_DAS_Quest2_AUKEYBattery_Holder.stl – For Quest 2 DAS Users
I’ve linked all the parts I used to create the models.
Portable Charger 10000mAh AUKEY Smallest USB C Power Bank – PB-N83 (#ad)https://amzn.to/3onVZW1
I recently purchased the Eufy off amazon because it was very cheap, I have the YI Home outdoor cameras but they are not 2k. Since the Eufy camera was meant for indoor, I designed an enclosure to be used outdoors.
There are (2) variations of the design for the Eufy Security 2K Indoor Cam https://amzn.to/3mF0wCu(#ad)
Stock Mount – These are to be used with the mount/stand that comes with the camera. 1 x Eufy2kCamera_StockMount_Enclosure_v2.stl 1 x Eufy2kCamera_StockMount_Backplate_v2.stl 1 x Eufy2kCamera_StockMount_Sunvisor_v2.stl (optional) 1 x Eufy2kCamera_StockMount_Sunvisor_Extended_v2.stl (optional)
3rd Party Mount – 1/4 Thread – These are to be used with anything 3rd party security, some additional hardware is required. See Note Below. 1 x Eufy2kCamera_3rdPartyMount_Enclosure_v2.stl 1 x Eufy2kCamera_3rdPartyMount_Backplate_v2.stl 1 x Eufy2kCamera_3rdPartyMount_Sunvisior_v2.stl (optional) 1 x Eufy2kCamera_3rdPartyMount_Sunvisior_Extended_v2.stl (optional)
Hardware required:
4 x M3x10mm screws 4 x 3x5mm(L)-5.4mm(OD) Metric Threaded Brass Knurl Round Insert Nutshttps://amzn.to/3kJ85HB(#ad)
Hardware required for 3rd party mount.
1 x Threaded Insert, 1/4 inches-20 x 6mm L x 8mm OD Female Thread https://amzn.to/3oIH35l(#ad)
During the end of the live stream of the CraftBot FLOW IDEX XL, there was a giveaway for Jessie PLA from PrintedSolid. I happened to be one of the 15 winners during the giveaway and got to choose one PLA from JessiePLA. I choose ARMY Green PLA, a perfect fit for the FAB365 Foldable Willys MB Jeep. The filament quality is excellent for the price, I will definitely order some extra filament on the next order. Printed Solid is my go-to for my PRUSA needs.
I love all the USB extension mods for the PRUSA Mini, but I didn’t want to mod the screen or have a separate USB extension sitting on the desk. I have my PRUSA Mini on my desk with limited space. I designed this USB extension to sit on top of the Z-Axis Motor.
This was designed around these USB cables below, might fit other brands. Product: https://amzn.to/3hVHRPT (#ad)
There are (4) variations with different angles and pattern designs.
These versions sit face straight out, adjusted 45 degrees to counter how the Z-Axis is positioned. Prusa_Mini_Z-Axis_USB_45D.stl Prusa_Mini_Z-Axis_USB_45D_Vented.stl
These versions sitting face left or right, sitting at a 45-degree angle. Prusa_Mini_Z-Axis_USB_Right-Left.stl Prusa_Mini_Z-Axis_USB_Right-Left_Vented.stl
